Saturday, September 21, 2013
Harley Davidson Carburetor adjustment instructions
REMOVAL of the CARBURETOR with an Edelbrock recommends consulting a certified service-guide to the make, model and year of the motorcycle before dismantling the equipment parts. 1. turn off the fuel valve before you start. 2. disconnect the battery remove the possibility of sparks or accidentally engage the starter. 3. disconnect the air cleaner. 4. remove the choke cable on its bracket. 5. disconnect the fuel line and vacuum lines to carburetor. 6. gently remove the carburetor and manifold. The MANIFOLD requirements of the Edelbrock quick kits and complete kits are designed to work with the stock manifold that OE is the engine. Aftermarket blocks works with an Edelbrock Carburetors. S S "E" & series and Screamin ' Eagle flange mount blocks works with an Edelbrock flange style Carburetors. Edelbrock Carburetors, CARBURETOR Setup out of the box ready to be installed onto the engine. 1. remove the cable bracket on the right side of the head and install the throttle cables into the cable wheel "pull" cable, locating the cable to the bicycle from 08: 00 to 11: 00 position and locating the cable wheel-set to "push" the cable. See Figure 1. AIR CLEANER INSTALLATION.
Get file free click at here
